Our media walls provide a great low cost backdrop for press conferences, interviews, trade shows and exhibitions.
The media walls have multiple twist lock adjustable poles which can vary the height and width - so you can choose a custom size to suit your application.
- Includes adjustable poles for custom sizes
- Width can be from 1300mm to 3050mm
- Height can be from 1000mm to 2440mm
- High quality full colour printed banner
- Strong black anodised aluminium frame
- Easy to assemble in minutes
- Packs away into a strong nylon carry bag
- Packed weight 8.3 kgs (Frame Only)
- Packed Size 1020x240x100mm (Frame Only)
Q. Can you adjust the size of the media wall?
The media wall includes poles that have a multiple twist lock mechanism, allowing each pole to be extended. Simply twist the locking mechanism to allow the pole to extend to the required length, then twist it again to lock it in place. The horizontal poles include a centre piece that does not adjust, but this can be removed to reduce the media wall to even smaller sizes. Please note: it is important to determine the size you will need for the frame and to order the correct banner size to fit the frame.
Q. How long does it take to assemble the media wall?
It takes 2 people and about 5-10 minutes to set up the media wall. Assembly guide included.
Q. Can I use the media wall outdoors?
We suggest using the media wall indoors only. They only have 2 feet at the bottom for support, and the banner acts like a sail in the wind, making it easy to blow over. Theoretically, the feet could have sand bags applied to hold them down, and/or the frame could be tied to something for support outdoors, however we can not guarantee this would work and advise against it.
Q. Can I order several different sizes of banners for this media wall?
Yes, you can order different sizes of banners by selecting them in our instant pricing calculator and adding them to your cart. You can then use the same media wall frame and adjust it to the different sizes when needed.
Q. Can I get the Media Wall Frame in a different colour?
Unfortunately, we only provide Media Wall Frames in Black.
Q. How can I remove creases from the polyester fabric?
We recommend that you use a steamer to remove any creases from the polyester fabric. You can use a warm iron, but it is important that you use an ironing cloth so that the iron does not contact the fabric.
Q. How long will it take to produce the media wall?
We can produce your Media Wall by the below breakdown;
Q. Are there extra setup fees for multiple designs?
Price includes the set up cost for the first design only. If you have multiple designs you will get the lower bulk price, but for each additional design there is a multiple artwork charge starting at $6 + GST. For accurate pricing on this charge simply use the pricing calculator above.